ANCHORAGE CONNECTOR CONNECTION INSTRUCTIONS
Gate Hinge
Safety
*Note: When closed and locked, safety
must contact the gate hinge as shown.
2.5” Ø MAX
4” MAX
SCENARIO A
SCENARIO B
SCENARIO D
SCENARIO C
Inspect every connection. Ensure gate has closed and locked. Ensure dangerous loading conditions
are not present and will not develop in the event of a fall. Subjecting the anchorage connector to
any forces that are not along the major axis (transverse, over edge, cantilever, ect.) may cause
deformation sufficient to inhibit normal operation,
even at forces less than the specified
serviceability load.
Note:
Buildup of dirt and grime around moving parts may cause opening/closing action to hang up
or have a gritty feel. To avoid lasting degrading effects to the action, clean and lubricate promptly
according to CLEANING AND LUBRICATION INSTRUCTIONS.
Summary of Contents for EAL12NC-72Y-C13
Page 11: ...NOTES ...
