57
Step 3.
You can click on
“Edit” to edit the IP Camera’s setting:
Edit the name, area, zone, and select attribute settings of the IP Camera.
Whole Area:
Unselected: The IP Camera will only record video when alarm is triggered by
sensor belonging to same area as the IP Camera
Selected: the IP Camera will also record video when alarm is triggered by
sensors belonging to different area.
Bypass:
When an IP Camera is bypassed by the panel, the Panel will not
activate the IP Camera to record video when an alarm is triggered.
No Response:
If set to No Response, the IP Camera will enter Privacy Mode
enter selected mode and will not provide image streaming or video recording
function even when alarm is activated.
If set to other response action such as Burglar Alarm or Start Entry, the IP
Camera will provide image streaming and video recording function under
selected mode.
Trigger Response:
The Trigger Response function is disabled for IP Camera.
Summary of Contents for VST-1818
Page 1: ...September 30 2017 ...
