expired.
This function is only used when a fall is detected, if the Active Button on
Mobile Lite or the Active Button of the learnt-in Fall Sensor is pressed to
activate alarm, normal guard time is used instead.
Confirmation Voice Prompt
After guard time expires, Mobile Lite will summon help based on the
programmed reporting methods. When Mobile Lite is reporting, it will first
play a voice prompt “Connecting”, and then repeat voice prompt “Call in
progress” every 10 seconds to indicate that the call is in progress.
When Mobile Lite is connected to CMS successfully, it will play the voice
prompt “Call Connected”.
After connecting to CMS successfully and until a call recipient picks up the
call and presses any DTMF, Mobile Lite will repeat the voice prompt
“Please standby for an operator” every 10 seconds.
Last Location
The Last Location function determines Mobile Lite reporting behavior when
activated.
Mobile Lite will regularly scan for nearby Wi-Fi hotspots, other wireless
access points and store the data according to set time interval. Mobile Lite
will also check GPS location regularly according to set time interval.
When Mobile Lite is activated to send alarm report, it will begin to check
last position while acquiring new Location. If new location cannot be
acquired by the time Guard Time ends, Mobile Lite will send report with
last location. After new location is acquired, Mobile Lite will send another
report to update the location info.
<
<
N
N
O
O
T
T
E
E
>
>
Mobile Lite will check Last Location by transmitting last stored
Wi-Fi hotspot data to Google Wi-Fi positioning service for
location identification or using last acquired GPS location if there
is any. (GPS function is only turned on when no Wi-Fi hotspot
data is obtained.)
Mobile Lite will disregard Last location if it is older than 8 hours.
29