5. Local RF Device Management
Mobile Lite can learn up to
20
RF devices which can be used to activate Mobile
Lite to make emergency report.
Entering Learning Mode
Press the Info Button of Mobile Lite for 6 seconds. At the 6
th
second Mobile Lite
will emit one beep and play voice prompt “Release for device pairing or
continue to hold for next option. Release the button to enter learning mode.
Mobile Lite R23 will play voice prompt “Entering Pairing Mode, press the
button on the peripheral to connect to the device.”
Device Learning and Testing
Step 1.
Press the Button on RF device to transmit signal. Refer to RF device
manual for detail.
Step 2.
Mobile Lite will play voice prompt “Pairing completed” when it receives
the signal from the pendant to indicate it has learned in the pendant.
Step 3.
Repeat Step 2~3 to learn in all devices, device learnt in will be assign
from Zone 1 to 20 in sequence.
To test learnt in device, press the device button again after learning,
Mobile Lite will emit a long beep if it successfully receives signal from
already learnt in device.
After complete learning, press the Info Button on Mobile Lite once to
exit learning mode. Mobile Lite will emit 1 beep.
25