6. Operation
6.1. Answering Incoming Calls
Mobile Lite will ring when there is an incoming call.
Press Mobile Lite Active Button to pick up the call.
If the number of the incoming call matches any of the Caller ID, Mobile
Lite will instantly pick up the call.
Press a DTMF key for over 1 second to enable a designed shortcut
function.
- Enter (
1
) to talk only.
- Enter (
2
) to open two-way voice communication.
- Enter (
3
) to listen in only.
- Enter (
9
) to hang up. You can also put the handset back to the base
cradle to end the call.
Press Mobile Lite’s Active Button for 5 seconds to hang up or press the
learnt-in RF device (WTR, Fall Sensor or PB) button once to hang up.
The caller can press either DTMF (9) key, Active Button of RF device, or
put the handset back to the base cradle to hang up.
Pressing any DTMF (except DTMF 9) can reset the communication time
to 5 minutes.
6.2. Current Operation Condition
Mobile Lite uses its LED to remind the user of its Current Operation Condition.
LED indicators:
LED
Behavior
Indication
Green LED (Top LED)
On
Mobile Lite is being charged.
1 flash every 5 seconds
Mobile Lite operating
normally
Red LED (Top LED)
1 Flash every 3 seconds
Mobile Lite low on battery
Amber LED (Bottom LED)
1 Flash every 3 seconds
Cellular Network fault
When Mobile Lite is being charged, the Red LED will not indicate the battery
status.
If Mobile Lite is activated while having a Cellular Network fault (Amber LED
flashes once every 3 seconds), it will play voice prompt “Poor cellular
connection. Please call 911.”
26