5.1.2. Local Learning
Instead of learning devices via configuration webpage, you can also learn in devices by using
the learn button located on the back of Control Panel.
Step 1.
Press and hold the
Learn
Button on the back of Control Panel for 10 seconds, release
when the Control Panel emits one short beep. LED 1 Green will turn ON to indicate the
Control Panel is now in learning mode
Step 2.
Press the test or learn button on each device to transmit signal, refer to device manual
for detail.
Step 3.
When the Control Panel receives signal from device, it will emit 2 beeps to confirm. The
device will be included in the panel automatically.
Step 4.
After finish learning all devices, press and holde the Learn button for 1 second. The
Control Panel will emit 2 short beeps to indicate it has returned to normal mode. LED1
will dim.
<NOTE>
Device learnt in via Local Learning will be assigned to Area 1 only, which is limited to 80
devices.
The Control Panel cannot enter learning mode when under Away Arm/Home Arm or
Walk Test mode. The Control Panel will emit 5 beeps to indicate error.
5.1.3. Edit Devices
After finish learning devices, proceed to edit the device setting.
Step 1.
Click
Panel
to enter Panel webpage. All learnt in devices will be displayed under
Device List
section.
17