2
To remove the back cover, first lift the cover partially from the bottom, then push inward
from the top to disconnect the back cover from panel main body.
3
Remove the 4 screws securing the internal cover.
4
Replace the internal cover for setup:
I.
Connect Ethernet cable to panel Ethernet port.
II.
Insert a functional micro SIM Card into Micro SIM Card Compartment, the SIM Card
PIN Code must be disabled first.
III. Slide Battery Switch to ON position.
IV. Plug in AC adaptor to power on the panel.
5
Wire the Ethernet and AC power cable, close the cover and choose to install the panel on
desktop, or mount on the wall.
When closing the cover, first attach the back cover to main body from the top, then close
the cover from bottom.
Desktop:
I.
Replace the back cover, wire the cable through the side hole and tighten the 4 fixing
screws. (figure 3)
II.
Replace the standing base. (figure 4)
Figure 3 Figure 4
III. Put the panel at desired location to finish installation.
8