learn code.
For IP Camera VST-1818 Series, press and hold the Privacy button for 10 seconds.
Step 4.
When the system received the signal transmitted from device, the screen will display its
information for selection.
<NOTE>
It takes 5-10 seconds for the Control Panel to receive a learn code from ZigBee or
Z-Wave Sensor.
Step 5.
Click “
Add
” to include selected device into panel. If the sensor you wish to learn into
already exists in the system, the sensor information will be displayed in the
Learned
Device
section. If not, the sensor information will be displayed in the
Detected Device
section.
<NOTE>
For VST-862 F1 devices, press and hold the learn button for 3 seconds for the Control
Panel to receive a learn code, and then click “
Add
” within 30 seconds.
Step 6.
If the device is successfully learnt into the system, the added device will be displayed in
the “
Learned Device
” section.
Step 7.
Repeat Step 3~5 to learn in all device, click Stop to exit learn mode when complete.
The system will automatically exit Learn mode if left idle for 5 minutes.
16