12
Command 43
Periodic Test Call
CTC-1052-QT-DT35A can be programmed
to make test calls periodically (every 0–7
days, 0-23 hours, and 0-59 mins).
Function Selection
Result
(000000)
OFF
(
DDHHMM
)
DD: (00) - (07)
HH: (00) - (23)
MM: (00) - (59)
0 - 7 days,
0 -23 hours,
0 -59 mins
<NOTE>
Whenever programming mode is
accessed, CTC-1052-QT-DT35A will
reset the Periodic Test Call timer.
Periodic Test Call will only function with
telephone numbers assigned to
SMS
reporting method in
Command 20-24.
Command 44
Mobility Timer
This function monitors user movement around
the premises and sends an inactivity report to
the Monitoring Center if the user fails to reset
the inactivity timer.
This will disable or enable the Inactivity Timer
with selectable count down periods. Options
are:
Function Selection
Result
(00)
DISABLE
(01)
1HR
(02)
2HR
...
....
...
...
....
..
(36)
36HR
Factory Default is set as (
00
),
DISABLE
.
<NOTE>
The Mobility Timer counting down can
be reset by:
1.
Pressing the
Reset Button
on
CTC-1052-QT-DT35A, or,
2.
Movement
detected
by
PIR
Detector
3.
Only workable by entering 2 digits.
When Mobility Timer expires and no
reset signal is received, CTC-1052-QT-
DT35A will start to emit one long beep
every 5 minutes to alert the user. After
30 minutes, if reset signal is not
received, a mobility alarm reporting will
be made.
The reporting method for mobility alarm
is the same as the emergency alarm.
The report will be sent based on your
reporting methods without guard time
waiting.
When (
00
) is selected, no code is sent
to Monitoring Center.
When CTC-1052-QT-DT35A is in idle
mode, press and hold the Learn Button
for 15 seconds, until you hear a long
beep. Release the button and the
Mobility timer will be suspended.
Command 46
Two-Way Period
This command is used to program the
allowable time duration for Two-way voice
communication period (Speech mode). It
can be set from (
01
) (1 minute) - (
10
) (10
minutes).
Function Selection
Result
(01)
1 MINUTE
(02)
2 MINUTES
(03)-(10)
3-10 MINUTES
During
the
two-way
voice
comminucation
, CTC-1052-QT-DT35A will
emit two beeps via the telephone handset
to alert the call recipient the remaining time
of 20 & 10 seconds. Press any DTMF key
except the hang up key to reset the
communication time to its preset duration.
Summary of Contents for CTC-1052-QT-DT35A
Page 1: ...CTC 1052 QT DT35A User Manual Sep 4 2020...
Page 4: ......
