Climax BW2600, Operating Manual

Page: 56 / 126

Page 40 BW2600 Operating Manual
5. Slide the locking collar
onto the mounting rod and
install the radial mount
onto the mounting rod (see
Figure 3-18).
T
IP
:
If a greater distance
from the BW2600
mounting rod is
required, use the
radial mount (P/N
28208). This will
change the bolt
setting to between
11–14" (279–356
mm).
Use the BW3000 radial mounts for a maximum of 5" (127 mm). If
more radial torch clearance is required, use a 10" (254 mm)
radial mount. BW3000 radial mounts can be joined together if
required.
If a longer mounting rod is required, use the mounting rod
extender to increase the length of the mounting rod without
affecting stiffness.
6. Install the BW2600 onto the radial mount.
7. Attach the extensions to the
BW2600
and reach through the hole to be
welded for quick adjustment of the
base (see Figure 3-19).
NOTICE
Use of a scale or dividers
immediately clarify
movements required to swing
the bore welder spindle axis
into the bore center.
F
IGURE
3-18. R
ADIAL MOUNT ON THE MOUNTING ROD
F
IGURE
3-19. BW2600
ON THE MOUNTING
ROD