Climax Technology vesta series, User Manual

Page: 34 / 90

31
<NOTE>
 The Device Edit page is only available for the newest BX/Siren series and BX series
without DIP Switch .
Edit your Siren setting and information accordingly to instruction below. Click “ OK ” to save your
new changes when finished. Alternatively, click “ Default ” to reset all parameters to default
values or click “ Reset ” to re-enter all the information.
 Name: Enter a name for the Siren.
 Area: Select the area which the Siren belongs to.
 Zone: Select the Siren zone number.

Attribute:
 Permanently Bypass: If checked, the Control Panel will completely ignore all signal
received from the Siren. A bypassed Siren will not be able to trigger any response,
including alarm or fault from the Control Panel. All other attribute settings will also be
ignored.
 Whole Area: if checked, all the Volume, Voice and Behavior functions will be
simultaneously enabled in Area 1 and Area 2.

Volume:
 Alarm Sound: set the volume of the alarm sound of the Siren when alarming.
 Full arm confirm beep: set the volume of the confirm beep sound of the Siren when