Climax Technology vesta series, User Manual

Page: 9 / 90

6
3. Getting Started
Read this section of the manual to learn how to set up your Control Panel and program System
Settings over the Web page.
3.1. System Deployment
Follow guidelines below when planning installation location:
 The Control Panel requires Ethernet connection.
 The Control Panel should be installed at a location that is hidden from outside view.
 Avoid mounting the Control Panel near large metal objects which may affect wireless radio
strength.
 The Control Panel should be protected by sensors so that no intruder can reach the Control
Panel without first activating a sensor.
 When using routers to improve network coverage, remember to use only Router
with backup batteries for security sensors. If you use a Router without backup battery for
security sensors, the Router will be powered down in case of AC failure, and you security
sensors will lose connection with the network.
Home Automation devices (Power Switches…etc) do not have this limit and can be used
with any Router.
3.2. Installation
The Control Panel can be placed on deskop.
1
The panel casing is secured by two top clasp hooks and two bottom screws and lossen the
2 bottom fixing screws and then two top clasp hooks to open cover.
2 Flip over the panel for configuration:
I.
Connect Ethernet cable to panel Ethernet port.
II. Connect the Power Adaptor to a Wall Outlet and the other end to the Control Panel.
After several seconds, the Control Panel will emit 2 beeps to indicate that the system
is now operational.
III. Slide Battery Switch to ON position.