CLIMAVENETA i-LIFE SLIM 102, Installation, User And Maintenance Manual

Page: 12 / 15

12 i-LIFE SLIM EN 05/2013
ELECTRICAL CONNECTIONS I A
Make the electrical connections following the instructions
shown under General warnings and Fundamental safety
rules, with reference to the diagrams provided in the acces-
sory installation manuals.
Before performing any work, make sure that power is dis-
connected. The appliance must be connected to the power supply via a
disconnect switch with minimum contact opening of 3 mm,
i.e. a device that ensures complete disconnection of the
appliance
MAINTENANCE I A
Periodical maintenance is essential to ensure efficient, safe
and reliable operation of the fan coil over time.
Some maintenance operations are required every six months, others once a year, carried out by authorised and
trained personnel from the Technical Service and using orig-
inal spare parts when required.
CLEANING THE OUTSIDE OF THE UNIT I A
Before any cleaning and maintenance work, disconnect
the unit from the mains power supply, switching off the
mains switch.
Wait until the components have cooled down, to avoid
the danger of burns.
Do not use abrasive sponges or abrasive or corrosive
detergents, to avoid damaging the painted surfaces.
When required, clean the outside surfaces of the fan coil
using a soft cloth dipped in water.
CLEANING THE AIR INTAKE FILTER I A
After a period of continuous operation, based on the con-
centration of impurities in the air, or alternatively when restarting the system after a long period of inactivity, pro-
ceed as follows.
A
B
C
D
Remove the filter cells
- remove the front grill by lifting it slightly and turning it until
it is completely released;
- remove the filter, pulling it outwards horizontally.
A Front grill
B Grill housing
C Filter
D Filter removal