iGate2.0 User Manual
C r e a t e d : D e c e m b e r 3 , 2 0 2 1
c l i m a t e m a s t e r.c o m
17
FAULTS
The following Fault messages are displayed
and logged in the banner during the fault
condition and then sent to the Cloud Server.
CONDITION
ID TEMP SENSOR HIGH
Temperature reading > 122°F
ID TEMP SENSOR LOW
• Temperature reading = 0
• Reading not available
REMOTE SENSOR HIGH
Remote temperature > 122°F
NOTE
Displayed only if
REMOTE SENSOR
is set to
INDOOR
or
AVERAGE
REMOTE SENSOR LOW
Remote temperature = 0
NOTE
Displayed only if
REMOTE SENSOR
is set to
INDOOR
or
AVERAGE
HUM TEMP SENSOR HIGH
Humidity sensor temperature > 122°F
NOTE
Displayed only if using humidity temperature as a backup source during a fault condition with
the primary temperature sensor.
HUM TEMP SENSOR LOW
Humidity sensor temperature = 0
NOTE
Displayed only if using humidity temperature as a backup source during a fault condition with
the primary temperature sensor.
ID TEMP RANGE HIGH
Indoor temperature is > 99.0°F
ID TEMP RANGE LOW
Indoor temperature is < 40.0°F
HUM SENSOR FAILURE
Any of the following:
• Humidity sensor timed out
• Humidity reading is > 99%
• Humidity reading is 0
HUMIDITY RANGE HIGH
Humidity reading is > 90%
HUMIDITY RANGE LOW
Humidity reading is < 10%
OUTDOOR SENSOR FAILURE
OD temp > 127 or < -60
Wi-Fi HARDWARE FAULT
Communications error occurred with Wi-Fi module (resets after valid message received)
