EVAPORATIVE AIR COOLER CM-8000E
www.climateplus.ae
Installation of casters and caster frame diagram
Picture 4
Picture 5
Picture 6
1.
take two caster with brake, two caster without brake and two pieces of tank base ( as picture 4)
2.
two casters brake and without brake screw into the M10 hole pattern of tank base, the caster with break
should be installed on the outlet side and to make sure casters and tank base contacted close (as picture
5).
3.
Caster frame with caster fixation to the button of the tank by cross screw, and then screws with a cross
screw drive to tighten (as picture 6) the circles of caster frame are different sizes, the installation should
pay attention to the corresponding holes on the chassis.
4.
Disassembly diagramed for posterior lateral plate
Picture7
Picture 8
Picture
-07-