EVAPORATIVE AIR COOLER CM-8000E
www.climateplus.ae
To loosen 4 screws of posterior lateral plate (as picture 7)
1.
Remove the two dust networks, then raise up posterior lateral plate with hands (as picture 8)
2.
Put up the posterior lateral plate after pulling it out, finally, it is removed (as picture 9)
3.
Follow these steps to reverse the procedure for installation.
Water in / out diagramed
Picture 10
Picture 11 Picture 12
Picture 13
Water in
1.
Pull the water inlet (as picture 10)
2.
Inward water (as picture 11)
3.
Water in/out diagramed (as picture 13)
Water out
Counterclockwise rotation of the valve cover by hand and get it out, after all the water out, the drain value in
a clockwise rotation into the drain valve scat, until the close date. (as picture 12).
Warning
1)
Air cooler should be used environment of adequate ventilation, be avoided in a closed environment, so as
to achieve better cooling effect.
2)
The brake of caster brake should be used when the air cooler is running, to prevent it to slide.
3)
The pump automatically shut down when the air-cooler runs dry, you should supply water in time, before
adding water to stop air cooler running, and turn off the power, and water should not exceed the
maximum water level.
-08-