background image

 

22

 

Climate Caddy Two Year Limited Warranty 
 

TSI Products, Inc./Climate Caddy Products are warranted to the original retail 
purchaser, to be free from defects in materials and workmanship except as otherwise 
provided herein.  This warranty is not transferrable and is effective from the date of 
the original purchase date. 
 

This Warranty Covers: 
 

1.  During the first year from the original retail purchase date, TSI Products/Climate 

Caddy will, at its option repair or replace defective components, including labor 
and cost of shipment to original consumer. 
 

2.  After the first year from original retail purchase date, up to the term of the 

warranty, TSI Products/Climate Caddy will repair or replace defective 
components with an identical or reasonably equivalent new component for a 
$255.00 service charge which includes labor and cost of shipment to the 
original consumer. 

The Warranty Does Not Cover:   
 

1.  Cost of shipping the product to TSI Products/Climate Caddy. 

 

2.  Normal wear, scratches or fading of the product. 

 

3.  Damage caused by abuse, misuse, neglecting to follow use procedures, failure 

to follow installation procedures (See instructions in product package) or 
product modifications made by consumer.  
 

4.  Damage to home or vehicle electrical system or components caused by 

inadequate wiring to the product plug-in point. 

 
5.  Damage to any object placed close (see instructions on product package) to the 

air output of the heater. 
 

6.  Damage caused by dropping of heater. 

 

7.  Product sold outside the USA. 

 

8.  Consequential damages, incidental damages or expenses, including damages 

to property. Some states do not allow the exclusion or limitation of incidental or 
consequential damages, so above limitation or exclusion may not apply to you. 

 

 

Procedures for Warranty service:   

 

1.  Contact TSI Products/Climate Caddy (844-233-4121) for a return authorization 

number. Write this number on the carton being returned to TSI 
Products/Climate Caddy. 

 

Summary of Contents for ACC-HTR09

























Reviews: