Installation Manual PA Pro III
online
–
2018-03-16 Page 15 of 30
Roaming
Network connected while roaming
Call Status
Call active (not used in Climacheck application)
Wi-Fi Status
Wi-Fi Off
Wi-Fi on
Wi-Fi signal level
LAN Status
LAN off
LAN on (disconnected)
LAN connected
RTCU Gateway Status
RTCU Gateway not enabled
RTCU Gateway enabled
RTCU Gateway connected
USB status
USB host supported
Bluetooth status
Bluetooth off
Bluetooth on
Power status
Battery level (animated while charging)
6.3
Start
ClimaCheck PA Pro III starts directly when it is connected to the power supply. After half a minute,
the display shows
Connect to GPRS? (Default is Yes)
or
Connect to LAN? (Default is Yes)
depending on the configuration whether to use a SIM card or local network.
Press on
Yes
or wait for 10 seconds, to be able to connect to the internet and send data to
ClimaCheck online.
After around half a minute, the display shows
ClimaCheck PA Pro III
, the 6 digit ID, and the
application version. The unit can now be used.
The unit can be turned off by disconnecting the power. The internal backup battery allows for a
safe shut down.
