•
The heating and cooling cycle of a vehicle
'
s interior will in some cases loosen the adhesion of the suction cup. Check
the vacuum seal of the car mount for adequate adhesion each time you use the unit, and reinstall it if necessary.
•
If the car mount has problems staying on, clean the plastic suction cup with alcohol, then reinstall. Moistening the
suction cup may help adhesion in some cases.
•
To avoid extreme temperature from damaging the car mount, remove the unit if the temperature inside your
vehicle exceeds 70
°
C (160
°
F).
•
The dip in humidity and temperature at night may loosen the adhesion of the suction cup. For this reason, as well
as for security, it is recommended that you remove both the car mount kit and the SCOUT 355(B) when leaving
your vehicle overnight.
SSttoorraaggee pprreeccaauuttiioonnss
•
Do not store the device anywhere it may be exposed to water or in conditions of high humidity.
•
When the device is not in use for an extended period of time, bring it indoors and store it in some location with a
temperature range of -20
°
to +70
°C
(-40
°
to 140
°
F)
.
Cleaning the SCOUT 355(B)
•
Use a damp soft dry cloth to wipe the device
’
s casing (not the display screen). Never use organic solvents such as
benzene or paint thinner to clean the device. Use of these solvents can cause deformation or discoloration.
•
Use a soft, clean, lint-free cloth to clean the display screen. Moistened LCD screen wipes could also be used as required.
Troubleshooting the SCOUT 355(B)
Recalibrating the screen
If while using the device, you discover tapping an item doesn
’
t bring up the appropriate response, it means your
device has lost its calibration. Recalibrate the screen.
46
System maintenance and user support
Cleaning the SCOUT 355(B)/Troubleshooting the SCOUT 355(B)