c. Make sure that the suction bond is strong enough before proceeding to the next step.
d. Insert the pegs on the car mount
’
s cradle plate to the holes on the back of the cradle, and then move the cradle
downwards until both parts are engaged.
4. Insert the Destinator OP SD card into the device.
5. Dock the device on the cradle.
6.
A
Addjjuusstt tthhee ccaarr m
moouunntt
for the best viewing angle.
7. After setting up the device on the car mount, connect the car charger.
If the car engine is turned off, you may be required to switch the vehicle ignition back into the Accessories
position. Consult your vehicle owner
’
s manual.
e. Connect the car charger to the power connector on the cradle.
f. Plug the other end of the car charger to your vehicle
’
s cigarette lighter.
g. The power LED indicator lights up orange during charging. The hot keys backlight is also lit up.
14
First things first
SCOUT 355(B) setup