Clifford Responder LE 3.3X Page 7 Owner'S Manual Download

Page: 7 / 56

What is included

■

The control module with Stinger™DoubleGuard®two-stage shock

sensor

■

Control center (installed out of sight on your vehicle) with

integrated status LED and Valet override switch

■

One five-button/2-way Supercode Responder LE Remote Control

■

One five-button/ 1-way Supercode remote

■

Revenger™Soft Chirp™six-tone siren

■

A shut-down toggle switch

■

Window decals

■

Your warranty registration

Important information

Congratulations on the purchase of your state-of-the-art remote

start and alarm system. Due to the complexity of this system, it

must be installed by an authorized dealer only. Installation of this

product by anyone other than an authorized dealer voids the war-

ranty. All dealers are provided with a preprinted dealer certificate

to verify authorization.

By carefully reading this Owner’s Guide prior to using your system,

you will maximize the use of this system and its features. You can

print additional or replacement copies of this manual by accessing

our web site at www.directed.com.

��

Summary of Contents for Responder LE 3.3X

























































Search results

Summary of Contents for Responder LE 3.3X

Reviews:

Related manuals for Responder LE 3.3X

Brands by name

Popular brands

Clifford Responder LE 3.3X, Owner'S Manual

Search results

Summary of Contents for Responder LE 3.3X

Reviews:

Related manuals for Responder LE 3.3X

Brands by name

Popular brands