Click RF PiLOT, Installation Manual

Page: 13 / 25

23 22
RFSA-6x
Switching Actuator Functions
Description
Turn On Actuator switched On
Turn Off Actuator switched Off
Button Actuator contact On when Controller button pressed
Delay On Switched On with delay
Delay Off Switched Off with delay
Setting Time setting of delay for switch On / Off within the range of 2s - 60min. After altering the delay On/Off settings ‘SAVE’
must be pressed for each element altered.
The actuator must be powered and within communication range else an error will occur.
Control - Actuator Function Control - Actuator Function
T1
T2
T1
T2
Select the required function (highlighted white) using
up & down on the direction dial.
Execute the selected function by pressing T1.
[
- Green symbol - command accepted and executed by the actuator (Fig.1)
×
- Red symbol - Error (Fig.2) - see page 39
To access the control screen, see page 20
tu 01.03.11 12:54
Turn On [
Turn Off
Button
Impulse
Delay ON
Delay OFF
Setting
BACK PROCEED
Fig.1
tu 01.03.11 12:54
Turn On
×
Turn Off
Button
Impulse
Delay ON
Delay OFF
Setting
BACK PROCEED
Fig. 2
RFDA-71, RFDEL-71
& RFDAC-71
Dimming Actuator Functions
Description
Turn On Actuator switched On
Turn Off Actuator switched Off
Brightness 0% Brightness setting within the range 0-100% (10% steps using left & right buttons)
Slowly On Gradually switches On during a preset time
Slowly Off Gradually switches Off during a preset time
Setting Setting the time of the gradual switch On / Off within the range of 2s - 30min. After altering the delay On/Off, Up/
Down or slowly On/Off settings ‘SAVE’ must be pressed for each element altered.
The actuator must be powered and within communication range else an error will occur.
Wait approx. 1s between individual button presses.
T1
T2
Select the required function (highlighted white) using
up & down on the direction dial.
Execute the selected function by pressing T1. (If the function
selected is
Brightness % , use left & right of the dial to change
the % output which are in increments of 10%).
[
- Green symbol - command accepted and executed by the actuator (Fig.1)
×
- Red symbol - Error (Fig.2) - see page 39
To access the control screen, see page 20
T1
T2
tu 01.03.11 12:54
Turn On [
Turn Off
Brightness: 0%
Slowly ON
Slowly OFF
Setting
BACK PROCEED
Fig.1
tu 01.03.11 12:54
Turn On
×
Turn Off
Brightness: 0%
Gradual switch ON
Gradual switch OFF
Settings
BACK PROCEED
Fig. 2
Actuator
Functions