background image

AFTER SALES SUPPORT

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

4

Important Safety Instructions (Cont.)

•     Disconnection:

 Unplug the appliance from the power outlet when it is 

not in use and before cleaning, servicing, moving or storing the appli-
ance. Grasp the plug and remove it from the outlet, do not pull the cord 
when disconnecting.

•    Guard removal: 

Ensure that the fan is switched off from the supply 

mains before removing the guard (grille).

•    

WARNING!

 Do not leave unattended during use! 

Always switch it off 

and unplug when not in use, if left unattended, and before cleaning and 
storing.

•   

WARNING! 

Electric shock hazard! 

Do not plug in the fan until fully as-

sembled.

•    

RCD: 

Unless your home is already fitted with a residual current device 

(safety switch), we recommend installing an RCD with a rated residual 
operating current not exceeding 30mA to provide additional safety 
protection when using electrical appliances. See your electrician for 
professional advice. 

Usage conditions and restrictions

•    Domestic use only: 

This fan is intended for indoor household use only. 

It is not suitable for commercial, industrial or outdoor use. Do not use it 
for anything other than its intended purpose (do not use it as a dryer), 
and only use it as described in this manual. Any other use may cause 
fire, electric shock or injury. 

•     Attachments: 

The use of accessory attachments not recommended in 

this manual may cause injury or hazards. 

•    Usage restriction: 

This fan is not intended for use by persons (including 

children) with reduced physical, sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for 
their safety.

•     Children

 should be supervised to ensure they do not play with the 

appliance. Close supervision is necessary when any appliance is used by 
or near children.

•     Location: 

Place the fan on a dry, flat, stable surface to avoid overturning. 

•    Keep the top clear: 

Do not place anything on top of fan.

•    Proper assembly: 

Do not operate the fan until fully assembled with all 

parts. Do not use the appliance without the protective grilles (rear and 
front guards). Do not attempt to force the grille in order to stop or start 
the fan.

Summary of Contents for FT-40MD

















Reviews: