background image

AFTER SALES SUPPORT

 (AU) 1300 886 649  (NZ) 0800 836 761  |       [email protected]

4

Important Safety Instructions (Cont.)

•    

WARNING! 

Electric shock hazard! 

Do not plug in the fan until fully assembled.

•    

RCD: 

Unless your home is already fitted with a residual current device (safety 

switch), we recommend installing an RCD with a rated residual operating 
current not exceeding 30mA to provide additional safety protection when using 
electrical appliances. See your electrician for professional advice. 

Usage conditions and restrictions

•    Domestic use only: 

This fan is intended for indoor household use only. It is not 

suitable for commercial, industrial or outdoor use. Do not use it for anything 
other than its intended purpose (do not use it as a dryer), and only use it as 
described in this manual. Any other use may cause fire, electric shock or injury. 

•     Attachments: 

The use of accessory attachments not recommended in this 

manual may cause injury or hazards. 

•    Usage restriction: 

This fan is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning use 
of the appliance by a person responsible for their safety.

•     Children

 should be supervised to ensure they do not play with the appliance. 

Close supervision is necessary when any appliance is used by or near children.

•     Location: 

Place the fan on a dry, flat, stable surface to avoid overturning. 

•    Keep the top clear: 

Do not place anything on top of fan.

•    Proper assembly: 

Do not operate the fan until fully assembled with all parts. Do 

not use the appliance without the protective grilles (rear and front guards). Do 
not attempt to force the grille in order to stop or start the fan.

•    

WARNING!

 DO NOT use the fan in the following areas:

 

-  Near an open flame, a hot burner, oven or other source of high heat.

 

-  On a soft surface (such as carpet) or where it may tip over during use. 

 

- Outdoors or in areas of high humidity without suitable ventilation (e.g., in a  

bathroom, laundry area), near a sink, washer, pool or any source of water.

 

-  Near curtains or in tight corners, to enjoy maximum airflow.

 

-  In areas where  flammable substances (e.g., paint, petrol, etc.) are stored or 

being sprayed and there is a risk of explosion or fire.

•    

CAUTION! 

Personal safety: 

Avoid contact with moving parts.

 

Never insert 

fingers, pencils or any other objects through the grilles when the fan is running. 
Keep hair and loose clothing well away from the fan when it is in use.

•    Free airflow: 

Ensure nothing is blocking the airflow outlet and air intake grilles. 

Do not insert foreign objects

 

into any opening as this may cause electric shock 

and/or a fire hazard.

•    

Liability: 

We assume no liability for any damages or personal injury caused by 

misuse of the product and/or failure to follow these instructions.

Summary of Contents for FT-30MD













Reviews: