Cli-mate CLI-DH8D, Installation & Operating Instructions Manual

Page: 9 / 16

INSTALLATION AND OPERATING INSTRUCTIONS 7
F. OPTIONAL CONTINUOUS DRAINAGE INSTALLATION
1. Ensure that unit is OFF and unplugged from wall socket.
2. Remove water reservoir and connect water drain hose
to spigot, see Fig. 2.
3. The other end of this hose must be placed over a water drain.
Note:
For the unit to drain correctly, no part of the hose should be
above the level of the water spigot.
G. MAINTENANCE AND REPAIR
Before carrying out any maintenance or cleaning of the unit, make
sure that the power to the unit is turned off and power cord is
removed from the power socket.
External cleaning of unit:
• Do not clean unit with any abrasive cleaning agents or solvents.
• Do not apply any water directly to the unit of cleaning.
• Only use a soft clean cloth for all cleaning purpose
Cleaning Filter:
Remove Air Intake Grille below to access filter, see Fig. 3. Use a
vacuum cleaner or wash in cool water to clean filter. Allow to dry
thoroughly before replacing filter and Air Intake Grille in the unit.
Air filter should be cleaned every
3 months for unit to continue to
perform as stated.
Repair:
If the unit or power cord is damaged,
stop using immediately and bring the
unit to authorised service centre for
repair,never attempt to dismantle,
repair or modify the unit by yourself.
Warranty will be null and void.
Fig 2
Fig 3
Pull out
the filter
as shown