Cli-mate CLI-DH8D, Installation & Operating Instructions Manual

Page: 7 / 16

INSTALLATION AND OPERATING INSTRUCTIONS 5
B. CONTROL PANEL & KEY PADS
POWER
Turns unit ON/OFF.
MODE
Allows selection of dehumidification speed
• Quiet dehumidification (Low speed)
• Normal dehumidification (Medium speed)
• Fast dehumidification (High speed)
HUMID
Allows selection of different room relative humidity ratios
(40%/50%/60%). Unit is automatically set on continuous mode
when turned on.
TIMER
To set automatic off timer at 1 /2 / 4 /8 hour settings.
ION
Switches ionizer ON/OFF.
C. OPERATION INSTRUCTIONS
1. Plug unit into power socket and press POWER button to turn
unit on, unit will beep three times and LED monitor lights will
illuminate indicating current settings. The dehumidification
setting is automatically set at continuous.
2. To select the dehumidification mode, press MODE button
to select Quiet (L), normal (M), or fast (H) dehumidification
respectively. LED light will indicate current setting.
Note
: When fast dry (H) dehumidification mode is set, humidity
ratio setting cannot be set.
3. To select room relative humidity (RH) ratio, press HUMID
button to select 40%-50%-60% respectively. When selecting
the HUMID ratios this will change the unit operating MODE
accordingly (Low/Medium/Continuous).
Note:
If the ambient relative humidity (RH) is less than 2% of the
selected room relative humidity ratio, the unit will automatically
switch off.
Note:
Energy Saving function: When the set room humidity ratio is
reached, the units fan will automatically stop after five minutes.
In 30 minute cycles, the fan will automatically switch on to detect
room humidity.