CLF POSEIDON Wash XL, Manual, Page: 11 / 38

Setup
Warning! Read “Safety Information” before installing, powering, operating the fixture.
Control panel and menu navigation
The onboard control panel and backlit graphic display are used to adjust the DMX address, fixture settings (personality),
service utilities. See “Onboard control menus” for a complete list of menus and commands.
Using the control buttons:
•
To enter the menu select [ENTER].
•
Press [UP], [DOWN], [LEFT] AND [RIGHT] to scroll within a menu or adjust values.
•
To enter a menu, select a function or apply a selection, press [ENTER].
•
To escape a function or move back one level in the menu structure, press [LEFT].
DMX address setting
The DMX address is the first channel used to receive instructions from the controller. For independent control, each
fixture must be assigned to a separate channel. The DMX address can be configured by using the DMX ADDRESS menu in
the control panel.
•
NO D MX: Display flashes and shows at ‘DMX: X‘.
•
DMX: Display backlight turns off and shows ‘DMX: V‘.
•
The fixture is fully RDM ready. For RDM functions please refer to the ANSI/ESTA E1.20-2006 standard.