Disassembly
2 - 10 Removing and Installing the Processor
2.Disassembly
Removing and Installing the Processor
Processor Removal Procedure
1.
Turn off the computer, and turn it over, remove the battery (
), and component bay cover (
2.
The CPU heat sink will be visible at point
on the mainboard.
3.
Remove/loosen
screws , , , , ,
,
, the reverse order indicated on the label
(
).
4.
Grip the heat sink tab
and carefully lift the heat sink
up straight (
do angle it as you lift it
) about a centimeter
in order to clear the fan unit, and then angle it around 45° to remove it from the computer.
A
7
6
5
4
3
2
1
8
9
9. CPU Heat Sink
•
7 Screws
Caution
The heat sink, and
CPU area in general,
contains parts which
are subject to high
temperatures. Allow
the area time to cool
before removing these
parts.
Figure 6
Processor Removal
a. Locate the heat sink.
b. Remove/loosen the
screws.
c. Grip the heat sink tab and
carefully lift the heat sink
up and off the computer.
c.
a.
A
8
b.
2
1
3
4
6
5
7
8
9
9
Summary of Contents for W230SD
