Clevo W230SD, Service Manual

Page: 40 / 106

Disassembly
2 - 16 Installing and Removing the SSD Module
2.Disassembly
Installing and Removing the SSD Module
SSD Module installation procedure:
1. Turn off the computer, turn it over, remove the battery ( page 2 - 5 ), component bay cover ( page 2 - 10 ) and 3G
( page 2 - 15 ).
2. Carefully remove the screw ( Figure 12a ) .
3. The interface adaptor will pop-up, and you can remove it from the computer ( Figure 12b ).
4. Insert the SSD module ( Figure 12c ), and you can tighten the screw ( Figure 12d ).
1
2
3 4
b.
c. a.
1
3
d.
2
4

Antenna Cable
Pay attention, and be careful not to damage
the antenna cable on the side when installing
the module or interface adaptor.

2. Interface Adaptor
3. SSD Module
• 2 Screws
Figure 12
SSD Module
Installation
a. Remove the screw.
d. Remove the interface
adaptor.
c. Install the module.
d. Tighten the screw.