Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" SATA hard disk
drives with a height of 9.5mm or 7mm (h). Follow your operating system’s installation instructions, and install all nec-
essary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual
) when setting up a new hard disk.
Hard Disk Upgrade Process
1.
Turn off the computer, and turn it over and remove the battery (
2.
Locate the hard disk bay cover and remove screws
-
.
3.
Lift and pull the bay cover in the direction of the arrow
and
.
4.
Remove the bay cover
.
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Lift and pull the bay cov-
er.
c. Remove the cover.
7. Component Bay
Cover
•
4 Screws
1
4
5
6
7
a.
b.
1
7
3
2
7
5
6
4
c.
Summary of Contents for W230SD
