Disassembly
2 - 14 Removing and Installing the Processor
2
.D
is
a
s
s
e
m
b
ly
Removing and Installing the Processor
Processor Removal Procedure
1.
Turn off the computer, and turn it over to remove the battery (
page 2 - 5
), and component bay cover (
page 2 - 11
).
2.
The heat sink fan and heat sink will be visible at point
on the mainboard.
3.
Carefully disconnect heat sink fan cable
, and remove screws
-
. Lift up the heat sink fan
off the com-
puter (
Figure 10b
).
4.
Remove screws
,
,
,
, the reverse order indicated on the label
(
Figure 10c
) and carefully pull the tabs
to disconnect the heat sink.
5.
Carefully (it may be hot) lift up the heat sink
off the computer (
Figure 10d
).
Caution
The heat sink, and CPU
area in general, con-
tains parts which are
subject to high temper-
atures. Allow the area
time to cool before re-
moving these parts.
Figure 10
Processor Removal
a. Locate the heat sink.
b. Remove the CPU fan ca-
bles and screws. Lift up
the CPU fan off the com-
puter.
c. Remove the screws.
d. Remove the heat sink.
A
B
C
E
F
4
3
2
1
G
H
F. Heat Sink Fan
H. Heat Sink
•
7 Screws
4
1
3
2
b.
a.
F
A
c.
B
C
D
E
H
d.
G
Summary of Contents for P370EM
Page 1: ...P370EM P370EM3 ...
