BIOS Update
Locating the Jumper Switch C - 1
C.Switches
Appendix C: Switches
This appendix is about the system’s switch setting. The switch (SW1) is used to change the CPU Clock Front Side Bus
speed setting to either 400MHz or 533 MHz. Be sure to turn OFF the system before you perform any maintenance/up-
grade procedure
Locating the Jumper Switch
1.
Remove the keyboard and shielding plate (see
2. The Dip Switch (SW1) is at point
on the mainboard.
Figure C - 1
Mainboard Switch
and Jumper
Location
1. SW1
1
1