Clever airpro, User Manual

Page: 7 / 12

7
1. Turn the iSUP (A) over and lay top down on a
flat even surface, making sure it is clear of any
sharp objects.
2 Locate the removable stabilising fin mounting
point (X) on the base of the iSUP.
3. Slide the stabilising fin (B) into the mounting
point with the arch facing the front of the iSUP,
ensure that the locking pin is kept clear.
Note: The fin may be stiff to install and require
a small amount of force to seat correctly.
4. Locate the locking pin insert point towards
the rear of the fin and push the pin through
until it clicks in place.
We advise that you remove the iSUP stabilising fin
when not in use or packed away to prevent damage.
1. Turn the iSUP (A) over and lay top down on a flat even
surface, making sure it is clear of any sharp objects.
2. Locate the removable stabilising fin mounting point
(X) on the base of the iSUP.
3. Locate the locking pin insert point towards the
rear of the fin.
4. Press the release clip down on the end of the locking
pin and remove to unlock the fin.
5. Slide the stabilising fin (X) towards the front of the
iSUP and out of the mounting point.
Note: The fin may be stiff to remove and require a small
amount of force to unseat.
Note: We recommend installing the fin after inflating the iSUP.
ASSEMBLY
STORAGE
ATTACHING THE STABILISING FIN
A
X
B