NT-100 Peristaltic Pump Filler
Page 18
6 Troubleshooting
Trouble(s)
Possible Causes & Solutions
Out of Power
1.
Check if the power switch is
ON
. (switch to “
－
” )
2.
Check if the emergency button is
ON
.
3.
Check if the power supply cable is loose or broken.
4.
Check if the safety fuse blows.
No Reaction
1.
Check if the operation mode is
Auto Mode
. (see P.3)
2.
Repeat the setting and filling processes.
3.
Check if using a foot pedal or any manual operation
assisting devices. Once using those devices, the filler will
adopt the signal from them in priority.
Bubbles Appear
in Tubes
1.
Be sure to eliminate air from the hose before filling.
2.
Check if the inlet hose is immersed in the tank.
3.
Check if the hose is fastened.
4.
Check if the hose is broken.
Strange Noise/
Not Filling Smoothly
1.
Check if anything blocks up the pump.
In case there is any problem or malfunction that you cannot solve, please contact us immediately.
