CLEOPATRA 90133701, Installation And User Manual

Page: 62 / 97

22
10.6 White light
The white light is connected to the K4 control unit of the ProSteam steam
generator or the DL40 steam generator as shown in the drawing below.
Optionally the White Light can be connected to a 12V AC 50Hz
power supply with a switch to operate the White Light. These
components are not in the scope of delivery.
10.7 Speaker
Observe the following when connecting to external stereo equipment:
The built in loudspeaker system should be connected only to an audio
amplifier which meets with the request of the EG low voltage directive
2006/95/EG as well as the security request of DIN EN 60065. The max. peak
voltage output of the amplifier must be below 25 V SELV. The maximum
peak power output of the amplifier must be under 30 W with electrical
impedance of 8
Ω
.
10.8 Overhead shower
Connect the overhead shower to the DN 15 water supply. The water
supply needs to have a pressure between 0,2 – 0,5 MPa (1 - 5 bar). The
overhead shower is supplied with a hose connection Ø10.
Connections for water supply have to be installed according to the
currently valid DIN 1988/EN 1717 / DIN 1986/EN 12056 as well as local
regulations (connection sleeve DN15“, flush with tiles).