CLEOPATRA 90133701, Installation And User Manual

Page: 47 / 97

7
3 Safety precautions
Before installing the product check whether the walls of the room can
support the weight of the roof and whether all technological equipment is
available.
Set the product to the zero energy state prior to any cleaning and repair
work, i.e. trigger the RCCB protective switch.
Install electrical devices (sockets, switches, lamps, etc.) in the steam
room or in the equipment installation room according to the relevant
regulations.
ATTENTION
Do not use silicone containing acetic acid! Plastic or metal
parts of the roof can be damaged by the use of silicone
containing acetic acid.
Seals
For the flexible seals between the elements we advise to use anti-fungal
silicone kit. Despite this, and dependant on circumstances, colour
changes in the kit can happen. If cleaning does not bring the wanted
result, the seals have to be exchanged. Renewing is not within our
warranty.
Power supply
The electrical connection may only be carried out by an
electrician, i.e. your electrical installer.
 The power supply for the Colour Light Basic is realized via a
230V/N/50Hz AC connection.
 The Colour Light Deluxe is supplied via the ProSteam or DL40 steam
generator.
 The white light can be supplied via the K4 control unit, or via a 12V
AC 50Hz power supply.
For electrical installation, all applicable VDE, country-specific and EU
regulations in their respectively valid versions must be observed. All
installation and inspection works must be carried out by an approved
electrician and in accordance with VDE 0100 Part 701 / E IEC 60364-7-701.
All works at the steam shower may only be carried out in a de-energized
state!