4/ 4
1/10 Duerdin Street, Clayton VIC 3168 Australia
Tel: +61 3 9239 8088 Fax: +61 3 9239 8024
E-mail: [email protected] www.clenergy.com.au
4. Installation Instruction
According to your plan, mark out
the position on the Rail for Isolator
Shade Installation.
Note
：
Allow an extra 265 mm of
Rail length for Isolator Shade
installation. Allow space above the
Rail for Isolator Shade opening.
-- Rotate up the Cover and fix the
Isolator to the Isolator Shade
according to the Isolator Installation
Guide.
-- Once the Isolator is fixed to the
isolator shade, position the Z
Module in the Rail channel and fix
the Shade with the bolt supplied.
Recommended torque is 4-5 Nm.
- The completed installation with
the mounted Isolator is shown in
the figure on the right.
