background image

 

REF: CL-10130-S 

Internal REF: 00143  

 

 

Maximum Tilt Angle Options 

 

  

Wind Region 

Region 

Region 

Region 

Region 

Wind speed (m/s) 

41 

48 

Maximum tilt angle (

30 

20 

Soil Type 

Post Embedded in concrete pier: 

300 mm diameter concrete piers 

minimum depth (m) 

Hard class soil 

1.37 

1.11 

[Gravels; dry (hard) clays] 

Very Firm class soil 

1.46 

1.19 

[Dry (Stiff) clays; clayey sands; coarse 
sands; compact sands] 

  

Firm class soil 

     

1.32 

[Damp clays; sandy clays; damp sands] 

Soft class soil 

     

1.70 

[wet clays; silty loams; wet loose sands] 

 

Notes: 

1.

 

Terrain Category 2 (TC2) refers to open terrain, including grassland, with well-scattered 

obstructions having heights generally from 1.5m to 5m, with no more than two obstructions 

per hectare. This certificate will only cover Postmount PM6-A/2100 installed on TC2. 

2.

 

Panel weight calculated: 28kg 

3.

 

Solar Panels structural check by others. 

4.

 

Other piers dimensions are possible, contact Clenergy, if required. 

5.

 

For concrete pier foundations, use 25Mpa strength concrete (minimum). 

6.

 

The scope of this certification is for projects located at a maximum altitude of 100m above 
sea level. No snow loads have been assessed. 

7.

 

If depth of footing is less than length of post below ground (embedment depth of post) the 

post must be cut to suit the new level. 

Summary of Contents for PostMount 6-A




















Reviews: