14
CLEMENTS
User Programs
User Programs
There are 15 user programs available that each store a complete
set of parameters (i.e. speed, time, acceleration, deceleration and
rotor) for a particular centrifugation process.
User programs are
viewed
or
selected
in program mode which is
accessed via the
P
ROG
button.
User programs are
altered
in parameter setting mode which is
accessed via the
M
ENU
button. Alterations are made to the
currently selected
user program.
View User Program
1.
Press
P
ROG
button. Press
I
NC
or
D
EC
buttons to increment or
decrement program number. (Holding
I
NC
or
D
EC
buttons
down will auto-increment or auto-decrement the selected
value.)
2.
With no button pressed for 5 seconds unit will time out and
revert to previously selected user program.
Select User Program
1.
Press
P
ROG
button. Press
I
NC
or
D
EC
buttons to increment or
decrement program number. (Holding
I
NC
or
D
EC
buttons
down will auto-increment or auto-decrement the selected
value.)
2.
Press
E
NTER
to make the displayed user program the
currently selected user program.
Alter User Program
1.
Select the required user program using the steps in
Select
User Program
above.
2.
Press
M
ENU
to select parameter setting mode.
3.
Each press of the
M
ENU
button advances to the next
parameter.
4.
Alter the required parameters as described on the previous
page.
5.
Press
E
NTER
to save the parameters and exit the parameter
setting mode.
6.
Parameter setting mode is automatically cancelled after a
5 second timeout with no button pressed.
