Clemco Pulsar II, Owner'S Manual

Page: 6 / 30

6
3.2 Components
"Pulsar II" – Cabinets consists of following parts:
- Cabinet Pulsar II
- Cyclonee
- Cartridge dust collector
-
Control units, air lines and control box assembly
3.3 Cabinet
-
Dust insulated cabinet
-
Stable metal sheet construction
-
White, reflecting colouring inside
- Height adjustable

operator can sit or stand during blasting
- Viewing glass (safety glass), 320 x 500mm, inside with Mylar lens
3.3.1 Cabinet lighting
Mounted outside, wear free, 2 x 20 Watt, 230V.
3.3.2 Door
-
Door on the right side, dust insulated enclosed
-
Measurement: width x height: ca. 450 x 500/900
-
Door safety interlock that interrupt blasting if door is opened
3.3.3 Gloves
-
Star loop rubber for simply engage in the cabinet
-
Special gloves, abrasion resistant, antistatic, coated inside with material
3.4 Cyclone
-
Blast media, dust and debris from the cabinet are drawn into the cyclone for separation. Dust and
fines are first separated from the reusable blast media, which is screened of oversize particles and
later held in the storage hopper for reuse. Dust and debris are then carried into the dust collector
which traps the dust.
- Magnet in the cyclone screen
-
Advantage : High blasting performance , continuous result on surface, low media consumption, dust
closed system
3.5 Dust collector cartridge
-
With detachable blower top for quick replacing of the cartridges.
- Automatic jet cleaning with caster
- 0,55kW-motor

ca. 8m³/min fan capacity
- Filter cartridge: