Clellan ZR-45 User Manual Download Page 3

 

 

 

 

 

 

 

When using standard size AA or other common rechargeable batteries such as NiCd and Ni-MH battery 
types, or when recharging them, be sure to use only the battery charger specified by the battery maker and 
read the instructions thoroughly. Do not recharge these batteries with their terminals reversed in the charger 
or before the batteries have cooled off sufficiently because they could leak corrosive liquids, explode or 
catch on fire. The same caution also applies to using the rechargeable batteries that may be supplied by 
the photo product’s manufacturer.
 

 

 

 

 

 

 

Do not touch the flash unit with wet hands, as this could cause an electric shock.
 

 

 

 

 

 

 

Keep the flash unit away from children to prevent them from putting the unit in or near their mouth, or 
otherwise touching a dangerous part of the product; as such contact could cause an electric shock. 
 

 

 

 

 

 

 

Do not apply strong physical shocks to the unit, as this could cause a malfunction that could cause the unit 
to explode or catch on fire. 
 

 

 

 

 

 

 

Never use active agents that contain flammable substances such as paint thinner, benzene or paint 
remover to clean the unit, and never store the unit in locations containing chemicals such as camphor and 
naphthalene, as this could damage the plastic case, cause a fire or cause an electric 
shock.   

 

 

 

 

 

 

 

 

 

 

 

Remove any batteries from the unit before storing the unit for a long time to prevent the unit from catching 
on fire or leaking corrosive liquids.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

WARNINGS for Batteries

!!

!

 

 

 

 

 

 

 

Never heat or throw batteries into fire, as this could cause the batteries to leak corrosive liquids, generate 
heat or explode. 

 

 

 

 

 

 

 

 

Do not short-circuit or disassemble the batteries because this could cause the batteries to leak corrosive 
liquids, generate heat or explode. 
 

 

 

 

 

 

 

Do not mix battery types, brands or old and new batteries, as this could cause the batteries to leak 
corrosive liquids, generate heat or explode. 
 

 

 

 

 

 

 

Do not install batteries in the reverse direction as this could cause the batteries to leak corrosive liquids, 
generate heat or explode. Even if only one battery is installed in reverse it will cause the Speedlite to 
malfunction.
 

 

 

 

 

 

 

Be sure to use the battery charger specified by the battery maker to avoid the possibility of batteries 
leaking corrosive liquids, generating heat or exploding.  

 

 

 

 

 

 

 

 

 

 

 

Do not carry or store batteries along with metallic materials such as necklaces and hair pins because such 
materials could cause the batteries to short-circuit, leading to battery leakage, heat generation or an 
explosion. In addition, specially when carrying a quantity of batteries, place them carefully in a storage 
case that prevents the battery terminals from touching another battery’s terminals because if they touch in 
reverse order it could also cause the batteries to short-circuit, leading to battery leakage, heat generation or 
an explosion.   

 

 

 

 

 

 

 

 

 

If corrosive liquids seep from the batteries and get in your eyes, immediately wash your eyes with running 
water and consult with a doctor. Your eyes could be seriously damaged if they are not treated quickly.
 

 

 

 

 

 

 

If corrosive liquids seep from the batteries and come in contact with your skin or clothes, wash immediately 
with running water. Prolonged contact could injure your skin. 

 

 

 

 

 

 

 

 

 

 

Always follow the warnings and instructions printed on the batteries to avoid activities that could cause the 
batteries to leak corrosive liquids, generate heat or catch on fire. 

 

 

 

 

 

 

 

 

 

 

 

3

Summary of Contents for ZR-45























Reviews: