Clellan ZR-45, User Manual, Page: 10 / 22

Operation ! ! ! !
Basic operation ! ! ! !
This section covers basic procedures in E-TTL mode in combination with a CLS-compatible camera. E-TTL
mode enables you to easily take flash photography with well balanced lighting.
STEP 1 Inserting the batteries
STEP 2 Slide the battery chamber lid
open.
STEP 3 Insert the batteries following the
[+] and [-] marks as shown.
STEP 4 Close the battery chamber lid.
Suitable batteries ! ! ! !
Insert four AA-type penlight batteries of any of the following types:Alkaline (1.5 V), Ni-MH (Nickel Metal
Hydride) (1.2 V)
When replacing batteries, use fresh batteries of the same brand.
For more on batteries, refer to “Batteries” and “Notes on batteries.”
Attaching the ZR-45 to the camera !
1 Make sure the power switch of ZR-45 and the camera body are turned off.
2 Rotate the mounting foot lock ring to the left.
3 Slide the ZR-45’s mounting foot into the camera’s accessory shoe.
4 Turn the lock ring to right to tighten the flash unit
Detaching the ZR-45 from the camera
1 Turn the lock ring to the left.
2 Slide the ZR-45’s mounting foot from the camera’s accessory shoe.
Adjusting the flash head ! ! !
Adjust the flash head to the horizontal / front position.
10