Clellan ZR-45, User Manual, Page: 11 / 22

Control buttons ! ! ! !
The basic control of ZR-45 functions is as follows:
1 Select function to be changed and press the button that controls the function.
2 Change the setting by rotating the selector dial.
3 Press the [OK] button to confirm setting.
Batteries ! ! ! ! ! !
Refer to the following table to determine when to replace or recharge batteries according to how long the
ready-light takes to come on.
Alkaline 20 seconds or more
Ni-MH 10 seconds or more
If batteries are weak, the flash head zooms back and forth even when the ZR-45 is turned on, making a
distinctive sound. In this case, replace the batteries even if an external power source is used.
Low battery power indicator
When battery power is low, the icon shown at the left appears on the LCD and the ZR-45 stops working.
Minimum recycling time and number of fl ashes for each type of batteries
For minimum recycling time and number of flashes for each battery type, refer to “Specifications”
Standby function to conserve battery power
If the ZR-45 and the camera are not used for more than a specified time, the Standby function is
automatically activated to conserve battery power. The Standby function activates when the camera’s
exposure meter is turned off (default setting).
The lead time before the Standby function is activated can be adjusted by custom setting.
11