Page 27
PL12EN-TVP100
03/07/2013
4.9 Sequencing
This unit has the ability to automatically switch from application to application if the
“Sequencing” feature is enabled. If Sequencing is enabled, the unit will start in Application
A. Once the batch is complete in Application A, the unit will automatically switch to
Application B. This switching from application to application will continue upon the
completion of each batch until the end application is reached.
Once the end application is reached and the batch is completed, a batch accept will be
generated and the unit will revert back to Application A. The batch accept output will only
be generated on the final application in the sequence.
In order to program the Sequence function, select the “Sequencing” item from the
navigation menu.
Using the arrow keys or the “UP” and “DOWN” soft-keys, you can highlight the type of
sequencing you wish to employ. Once the desired selection is highlighted, pressing the
“Select” soft-key will move the arrow to indicate that the selection has changed.
The “EXIT” soft-key, the “ESC” key, and the “Ship’s Wheel” will all take the unit back to
the navigation menu.
4.10 Administration
The unit’s password can be altered from the Administration screen. To alter the unit’s
password, choose “Administration” from the navigation menu. There are only two options
on the Administration screen, one is “Change Password” and the other is “Exit”. Choose
the “Change Password option by highlighting it and pressing the “ENTER key.
Cleco
®
Pneumatic Torque Verifier TVP-100 Series
SEQUENCING
OFF
A-B
A-C
A-D
A-E
A-F
A-G
A-H
Select
EXIT
ADMINISTRATION
Change Password
EXIT
EXIT
CHANGE PASSWORD
Please enter a new four-digit
password:
EXIT
CHANGE PASSWORD
EXIT
Please confirm your new password.
Confirm:
