Page 6 / 29 ClearView Corp. Ltd.
KR423I Encoder Modulator User Manual
Chapter 2 Installation Guide
This section is to explain the cautions the users must know in some case that possible
injure may bring to users when it’s used or installed. For this reason, please read all
details here and make in mind before installing or using the product.
2.1 General Precautions
✓
Must be operated and maintained free of dust or dirty.
✓
The cover should be securely fastened, do not open the cover of the products when the
power is on.
✓
After use, securely stow away all loose cables, external antenna, and others.
2.2 Power precautions
✓
When you connect the power source, make sure if it may cause overload.
✓
Avoid operating on a wet floor in the open. Make sure the extension cable is in good
condition
✓
Make sure the power switch is off before you start to install the device
2.3 Device’s Installation Flow Chart Illustrated as following
Connecting
Grouding
Wire and
Power
Cord
Acquisition
Check
Installing
Device
Setting
Parameter
Running
Device
Connecting
Signal
cable
2.4 Environment Requirement
Item
Requirement
Machine
Hall
Space
When user installs machine frame array in one machine hall,
the distance between 2 rows of machine frames should be
