Assemble Mid Rafters
1. Select the proper pipes (see End Rafter Introduction: previous page) and assemble and
secure as described in Steps 1 and 2 of the instructions for End Rafter.
2. After securing each pipe joint with one self-tapping Tek screw, locate the midpoint between
the pipe joints on the rafter and mark with a marker.
NOTE:
This mark corresponds to the positions of the QH1070 brackets attached to the end
rafter in the previous procedure. It will help keep the purlins inline as you assemble the frame.
3. Attach rafter foot (104302) to the rafter using hex head bolt (FAG363) and secure with nut
(FALB04B).
4. Repeat Step 3 for the remaining rafter foot.
5.
Repeat the above procedure to assemble the remaining Mid Rafters.
B1 = 102546 (Cross Connector)
B2 = 104302 (Foot)
B3 = FAG363 (Hex Cap Bolt)
B1
B1
B1
B1
B1
B1
B1
B1
B1
B2
30R23S1D
30R23S1
30PR23P2
30R23S1D
B2
B1
Visit www.ClearSpan.com for additional products and customer assistance.
7 of 40