11
Revision date: 08.08.14
Rafter Assembly
RAFTER ASSEMBLY (continued)
5. Use the diagram above and in the Quick Start section to mark the purlin clamp (QH1070) locations on the
underside of the assembled rafter.
ATTENTION:
Measure from the mounting bolt to the rafter and mark the location.
6. Loosely install QH1070 clamps. Tighten clamps after purlins are installed. See connection details in the Quick
Start section at the back of this manual.
4'-
2 5
/8"
4'-7
3/16
4'-2
5/8
"
4'-7 3/16
ATTENTION:
Measure from the mounting
bolt to the rafter and mark the location.
QH1070
Pipe Strap
QH1070
Pipe Strap
1/2" Mounting Bolt
at Rafter Splice
1/2" Mounting Bolt
at Rafter Splice
See full Rafter Profile in Quick Start
section for all QH1070 bracket locations.
