CLEARSPAN
™
HIGH TUNNELS
6
Revision date: 05.08.12
High Roller High Tunnel
OVERVIEW
This section describes how to assemble your high tunnel
shelter. For details, please see section, Assembling the
High Roller High Tunnel Components. See illustration
below to identify main parts of high tunnel.
Locate the required parts for each assembly procedure.
1.
Assemble the rafters and frame, and square the frame.
2.
Prepare and attach end panels.
3.
Attach main cover and Twist-of-the-Wrist assembly.
4.
Inside
Rafter
Baseboard is
supplied by
customer.
End Rafter
Purlins
Ground
Level
ATTENTION:
Position purlins evenly during the
frame assembly. Use the rafter pipe joints as guides
when installing the end clamps, cross connectors,
and purlins. Saddle all purlins (except the top,
center purlin) in the joint created by the separate
rafter pipes. See details in the Quick Start Guide.
