Page 14
Section H - Install Main Cover Material
Step 1:
To pull the cover over the frame, attach ropes to the cover at several of the grommets.
Step 2:
Throw the ropes up and over the frame and then pull the cover over the frame. You need
one person at each rope for this step.
Step 3:
Remove the ropes and position the cover evenly on all four sides.
Warning:
Do not leave the cover unattended until it has been secured in all four corners.
Step 4:
Secure the corners by using the Ball Tie Downs as illustrated below.
Step 5:
Once the corners are fastened, place Ball Tie Downs through all grommet holes and loop
around pipe as illustrated above.
