Parts List - Approximate (see list packed with your kit)
(2) Long extruded aluminum side rails with mitered ends (8' long)
(2) Short extruded aluminum end rails with mitered ends (2', 4', or 6' long depending on model)
(4) Steel legs with attached feet
(4) Galvanized steel tubing cross supports
(4) Galvanized steel split “T” clamps (2 halves with nut and bolt)
(4) Corner splice pieces
(16) Galvanized steel band clamps (with nut and bolt)
(4) Straight aluminum end braces
(4) Twisted aluminum side braces
(1) Package of Tek screws (self-drilling and self tapping)
(1) Expanded metal top (optional)
Bench Assembly
Step 1:
Install a 5/16" hex driver bit into the chuck of your drill/driver.
Step 2:
Attach (2) short side rails to (1) long end rail to form a U-shaped assembly. Use (1) corner
splice and (2) Tek screws in each corner. Be sure to line up the channels grooves before
inserting the Tek screws. Use a mallet if necessary to tap the splices into the channel grooves.
Page 3
